Wilson Pigott Bascule Bridge

Same as above

Same as above

Same as above

     One of the four drawbridges across the Caloosahatchee River in Lee County, Florida is the Wilson Pigott Bridge (named after a former Lee County Commissioner). It is located near Fort Myers Shores.  This structure is also known as the State Road 31 Bridge.  This is a bascule type bridge.

     It was built in 1960.  It is a two lane structure.  It is 27 feet tall.  It was built to replace a swing bridge at Olga.  This previous bridge was located 3 miles downstream.  It has been built in 1911 and was demolished shortly before the construction of the Wilson Pigott Bridge.

W.P. Franklin Lock and Dam

W.P. Franklin and Dam

Same as above

Same as above

     The W.P. Franklin Lock and Dam is a navigable structure located on the Caloosahatchee River near Olga, Florida 33 miles upstream of the Gulf Intracoastal Waterway. It was built in 1965 by the Army Corps of Engineers at a cost of $3.8 million dollars.  It is also currently maintained by the Corps.

    The lock and dam were built for flood and water control and as a preventative measure against salt water intrusion.

     The lock chamber was constructed of concrete and welded structural steel gates and concrete bays.  Dimensions are 56 feet wide; 400 feet long; and 14 feet high.  Lock lift is 2 to 3 feet.  During a one year period, 15,000 vessels pass through the locks.

Bascule Bridge over Caloosahatchee River

Same as above 

Same as above

Approach to R.R. Bridge over Caloosahatchee River

      The Seminole Gulf Railroad crosses the Caloosahatchee River in North Fort Myers, Florida.   The original bridge at this site was built as a swing bridge by the Alantic Coast Line Railroad in 1903.  This bridge was modified in 1977.  The main span was converted to a bascule through truss drawbridge.    The approaches to the bridge are wooden trestles.  Many railroads have used this crossing including:  Alantic Coast Railroad, CSX Railroad, Family Lines System, Seaboard Coast Line Railroad,  Seaboard System Railroad, Seminole Gulf Railroad.

Posted 4/20/2018

3rd Fullerton Avenue Bridge

     There have been four bridges traversing traversing the North Branch Chicago River at Fullerton Avenue (2400 West; 1850) east to west 4.8 miles from the river mouth.  

     The current bridge is the fourth bridge at this site.  It was built in stages.  The two northern lanes were built first. The prior bridge remained in place June to December 1960.  The old bridge was then dismantled and the four remaining lanes of the new bridge were constructed.  The completed bridge officially opened on September 21, 1961.It

     The bridge is a fixed steel and reinforced concrete structure.  It is 277 feet long and 80 feet wide.

     Contractors were:

Design:                    Division of Bridges and Viaducts City of Chicago

Construction:       William E. Schweitzer and Company

     Construction costs were $ 1.35 million.  

     Before the first bridge at Fullerton Avenue could be built, the street had to be extended from Ashland Avenue to the river.  The municipalities of Chicago and Lakeview both contributed to  construction costs 3/4 and 1/4 respectively.

     The bridge opened in 1874.  It was a fixed iron bridge   It was 225 feet long and 20 feet wide.

     Contractors were:

Design:                                             Fox and Howard

Construction Contractor:          Fox and Howard

     Construction costs were $5,000.  The bridge was removed In 1877.

     The second bridge at Fullerton Avenue was a wood and iron hand operated swing structure.  It was funded with contributions from Chicago ( 2/3) and Lakeview (1/3).

     Contractors were:

Design:                     Unknown

Construction:         I.W. Lavin Company       of

     Construction costs were $7,444.   The bridge was removed In 1894-5.

     The third bridge at this site opened in 1895.: It was a Pratt through Truss swing bridge. It rested on a rim bearing turntable.   It carried both traffic and street cars of the North Chicago Street Railway Company.  It was 164 1/2 feet long and 18 feet wide.  It had 5 feet sidewalks.  It was originally hand operated.  It was later converted to electric powered.

     Contractors were:

Design:                                                    Chicago Bridge and Iron Company

Superstructure Contractor:   Chicago Bridge and Iron Company

Substructure Contractor:       FitzSimmons and Connell Company

     Construction costs were $27,753.   The bridge was removed In December, 1960.

Current Fullerton Bridge over the North Branch Chicago River

Same as above

View from the Fullerton Bridge

Same as above

  Posted 1/31/2018

   For a short period of time (1836-1840) there were bridges at Pearson Street and Union Street crossing the North Branch Chicago River.  The bridges were Fixed wood bent.  Designer was unknown.  Construction contractor was unknown.  Costs were unknown. 

    Posted and expanded 1/28/2018.

      There is currently no bridge at this site.  Between 1868 and 1978, there were two bridges crossing north to south the South Branch Chicago River at Throop Street (1400 west; 2470 south) 5.3 miles from the river mouth.

     The first bridge opened in 1868.  It was a twin arch wood and iron swing bridge hand operated.  It was 152 in length.  It provided a connection between Bridgeport and the southwest side of Chicago.  In 1878, the bridge was replanked and repainted.   In 1889, new wheels were installed on the turntable and the bridge was rehabbed. In 1893, the bridge approaches were rebuilt and replanked. In 1897, the turntable was refurbished.

     Contractors were:

Design:                          Fox and Howard

Construction:             Fox and Howard

     Construction costs were $12,650.  Bridge was removed in 1902.

First Throop Street Bridge Pencil Drawing

     The second bridge was opened on March 1, 1903.  It was built by the Chicago Sanitary District.  It was an electric powered Scherzer Rolling lift bascule bridge.  It has a history of multiple repairs.

    Contractors were:

Design:                                                   Scherzer Rolling Lift Bridge Company

Superstructure Contractor:             American Bridge Company

Substructure Contractor:                 Lydon and Drews Company

     Construction costs were $189,648.  Bridge was removed in 1978.

Second Throop Street Bridge

Site of Prior Throop Street Bridge

Site of Prior Throop Street Bridge

Site of prior Throop Street Bridge

Site of Prior The pop Street Bridge

Photos added 4/9/2018

Third Erie Street Bridge  Chicago Historical Society

      Posted 1/13/2017

     Between 1860 and 1971, there have been three Erie Street Bridges (610 West: 670 North) over the North Branch Chicago River 1.9 miles from the river mouth.

     The first Erie Street Bridge opened in 1856.  It was a wood pontoon swing bridge hand operated.  In 1865, a flood swept the bridge away.  It was salvaged and rebuilt.  It was in service until 1971.

    The designer and contractor are unknown.  Construction costs were $5,000.

     The second bridge at this site opened April, 1871.  It was a swing wood hand operated structure.  It was 200 feet long and 32 feet wide.

     In 1889, the bridge turntable was rebuilt, the bridge house was relocated, the structure was repainted.  In 1895, the bridge floor was reinforced for street cars.  In 1899, the city made repairs after a crash with a steamer Charles Eddy.

     Contractors were:

Designer:                Fox and Howard

Construction:       Fox and Howard.

     Construction costs were $30,000.  The bridge collapsed under its own weight on May 18, 1908. 

     The third bridge at Erie Street opened on February, 1910.  It was an all steel electric powered double leaf bascule bridge.  It had only two support trusses.

     Contractors were

     Designer:           Division of Bridges and Viaducts City of Chicago 

      Superstructure Contractor:    King Bridge Company

       Substructure Contractors:     FitzSimons and Connell

     Construction Costs were $216,000.

    Bridge was removed on November, 1971

Site of Prior Erie Street Bridge over North Branch Chicago River

Same as above

Same as above

Photos added 4/11/2018

Internet Photo. Pontoon Bridge over North Branch Chicago River

     Written 1/11/2018

     Ogden Avenue crossed the North Branch Chicago River (950 West; 965 North) and the North Branch Canal (900 West; 1136 North) 2.9 miles from the river mouth.

     In 1924, a temporary pontoon swing bridge electric powered, steel through truss crossed the North Branch Chicago River at Ogden Avenue.  It was removed in 1931.

     On December 9, 1932, two steel double leaf bascle bridges opened–one over the North Branch Canal and one over the North Branch Chicago River at Ogden Avenue.  

     Contractors were:

Designer:                   Unknown

Construction: Great Lakes Dredge and Dock Company

      Construction costs were$4.6 million.

     Closed in 1993; removed in 1994

     Various sections of East Ogden Avenue were West of the North Branch of the Chicago River.

East Terminus of Ogden Avenue

East Terminus of Ogden Avenue

East Terminus of Ogden Avenue